I got this Micro Arts Studio “fuel dump” set of barrels back in September of 2019 for AU$30.50 as it looked pretty decent in the webstore picture. When I got the set and opened them up, I was pretty badly disappointed because the barrels are much smaller then the typical ones that we use for 40k and related gaming. The ones we tend to use from pretty much all manufacturers are pretty heavily based on the size of what was readily available in the day – Tamiya and similar 1:35 scale barrels from those various WWII sets.
These ones were/are much smaller, so instead I shuffled the box off into a pile of other assorted products of things to “get around to” at some stage, and then of course did not get around to them. I didn’t have any Tamiya or GW barrels handy, but here’s one from Marvel Crisis Protocol and one from (I think) Maxmini – both of the “standard wargaming size”. So you can imagine my disappointment when the items pictured on the website turned out to be considerably smaller than expected. They’d probably work very well for smaller minis closer to 25mm than 32mm+ and games like Bolt Action. Hence the more “grounded” paint scheme I went with.
A few months ago I came across them and removed them from the box, and put them into a tub to paint “sometime”. Then several weeks ago I found them again, and decided to get them out of the way by taking them outside to spray black. Which I did, and then they sat outside for three weeks as I forgot about them yet again. A week or so then, I found them outside and gave them a second spray of black, then let them dry, and got stuck into them.
By the time the next morning rolled around, they were ready for spraying. Or as we in the know call it – “Just Needs Varnish”. A coat of gloss, a day’s dry-time and then a round of Testors Dullcote later we have a completed set of five barrel piles. There’s these three smaller ones, one of which is a dupe – seen above.
Then there are also these two larger pieces with the tarps draped over the top of them that look a lot more impressive/nicer. Probably just due to having a bit more of interest happening on them. Niow that they’re finished I don’t resent these pieces any more, and I’m pretty satisfied with them. Of course, I’d be happier if they fit with the other barrles in my collection, but as-is they’re perfectly fine and do at least look pretty good in their own right.
As it is, these five pieces mark the beginning of my Season of Scenery 2023 models – may there be many more to come! (I do have a fair few items already on the production line…)
They don’t look too bad at all in their own cluster, and they look pretty decent next to both the regular human and the Primaris Marine – the issue with them is simply when placed alongside the “Tamiya-sized” barrels (which, by the way, is also the size of GW’s plastic barrels). On the other hand, these barrels do come in more than one size/capacity, so as long as these are kept to their own section of the board and not overly mixed in with the larger ones, it should all be good. Would I recommend these? Well, as I said, for historical games or games using smaller miniatures in the 25-28mm sphere I think they’d work nicely. For games like 40k, Star Wars Legion they could work in a pinch, or as long as you kept them away from the larger ones – and for even larger games like Crisis Protocol or Shatterpoint, I’d skip them entirely.
Azazel's Bitz Box. 
Nice understated colours. I like!
LikeLiked by 3 people
Thanks! I went for the more grounded military look on these ones.
LikeLike
Nice mate. Scale will always be a bastard for the rest of our days on the planet but I think you could have big barrels and little barrels. I bet you had a barrel of laughs painting them
LikeLiked by 5 people
Yea, but I keep thinking someday 3D printing will be easy and we will all print our minis at whatever scale we choose! 🤪
LikeLiked by 3 people
If only it were easy and not a pain int he arse I’d be doing it myself! I don’t want to spend time researching how to properly calibrate my resin. :p
LikeLiked by 1 person
Thanks mate – that’s the sizing plan! 🙂
LikeLiked by 1 person
You’re right, they look fine by themselves next to other miniatures. The Tamiya barrel makes them look like they were hit with a shrink ray though.
That said, I like your work here, and especially the worn canvas coverings look great.
LikeLiked by 3 people
Thanks! They were painted to fit in nicely with things like BA. As opposed to some of the other barrels you’ll see!
LikeLiked by 1 person
I had to chortle at your varnish comment! The barrel sets all look really good, both with and without covers on them. 🙂
LikeLiked by 4 people
“Just Needs Varnish” is my favorite painting stage! 😂
LikeLiked by 3 people
Haha, thank you (I think)! 🙂
LikeLiked by 2 people
Thanks John! I noticed it popped up elsewhere as well in the time since! 😉
LikeLiked by 1 person
They look fine to me mate 👍
LikeLiked by 3 people
Thanks Alex! 🙂
LikeLiked by 1 person
Great work Az, they’ve turned out really well, having worked in a company that shipped barrels, this size were always easier to handle than the bigger ones.
LikeLiked by 3 people
Cheers Dave. I can imagine! 😀
LikeLiked by 1 person
These have come out nicely I really like the ones with tarps over them. I think the scale with the other barrels should be OK, you do get smaller ones, “pails” etc. So it might be alright.
LikeLiked by 3 people
Yeah, in their own space I think they’ll be fine. As well obviously for less heroically-scaled games also.
LikeLiked by 1 person
Pretty nice, we tend to underestimate this kind of work and I think it’s really necessary. I like it a lot!
LikeLiked by 4 people
Thanks mate. I’m getting pretty busy with a lot more stuff in the same vein – hopefully I can get a lot more of it finished so I can put them away to maybe even use in a game!
LikeLike
That is a shame about the size but I would say if any of us are well-equipped to find a use for them, I think it would be you, mate. They turned out nicely in the end and I think they’re perfect for a WWII setting like you mentioned. Having said that, your idea of putting them in different places on the battlefield would work well too.
LikeLiked by 4 people
Yeah, it really did piss me off which is why it took until now to paint them, so now they’re in the waiting queue for the end of month photo before being shuffled off to whereever I end up storing them for the rest of eternity. Maybe in the Urban terrain/Crisis Protocol box, but larger resin bits like these barrels are a pain in the arse to store as well because they both have weight to them and also chip easily…
LikeLiked by 1 person
Given the scale, I’d say those are drinking mugs! 😉
Nice work though, I really like the dirt/rust on the bottom of the barrels. I didn’t know what the tarp was at first, but it immediately read the texture as plastic. Split second later I was like “oh yea, tarp!”.
LikeLiked by 3 people
For some of the upscaled models on the market today it’s only a half-joke! Thanks – I do like to dirty up the bottoms of terrain bits these days. 🙂
LikeLiked by 1 person