Marauder MM16 Dwarf Slayers …and I guess I have a finished unit now(!)

I have been going back and forth between Dwarves and Orcs a bit over the past couple of months. Well, rather than break that pattern, I’m going to continue with it while I get a bunch of models on my desk completed. Hopefully without adding too many more to the queue.

Marauder MM16 Dwarf Slayers

I recently decided to dig out all of my metal Slayers with the intent on working my way through them. In that batch are a pile more of the mid-90’s range, as well as a bunch from the Marauder range.

Dwarf Adventurer 09, Troll Slayer, Oldhammer Slayer

The Original Troll Slayer “Wild Nyjhul”

I was never a big fan of the Marauder Slayers. They were just a bit random for my taste, and a bit cartoony to boot. While the Slayer look wasn’t as fully defined at that stage, the archetype that will always work for me is “Wild Nyjhul”. The Marauder Slayers were overall a bit far from that.

WD scan via Stuff of Legends

I don’t think the painted examples helped too much either (grey beards and orange hair just looked – and still looks – odd). Finally, I just didn’t like the Morrison’s Dwarf sculpts as much as I did the Perry’s. Some of their other Dwarves are very fine, but their Slayers just aren’t as good. Citadel’s Dwarves have always had wonky proportions, but the Marauder Slayers were overall a step a little too far towards them just being heads with arms and legs attached.

Marauder MM16 Dwarf Slayers

Marauder MM16 Dwarf Slayers

Now that I’ve spent the last 5 minutes slagging them off. The act of painting them has warmed me to these models a bit. I also like the fact that they’re not all armed with the typical axes. After all, Dishonoured Dwarves would have come from a variety of walks of Dwarven life, and so I see the other weapons mixed in – particularly the swords – as a reflection of that. Particularly for the (let’s face it) less impressive models like the Marauder models that can be viewed as representing Dwarves who have more recently taken the Slayer’s Oath.

Marauder MM16 Dwarf Slayers

Marauder MM16 Dwarf Slayers

Marauder MM16 Dwarf Slayers

I’ve included a bonus shot of the naked slayer, to show off his dragon tattoo. I think I may have to go back over it with the blue to redefine it though. The thin layer of flesh to embed the tattoo “into his skin” seems to have worked a little too well…

Marauder MM16 Dwarf Slayers

Marauder MM16 Dwarf Slayers

For the wounded slayer, I considered adding fresh blood to his wrappings after varnishing the models. I decided against it, instead going for more of a dried blood stain on them than a monents-fresh set of wounds. Think David Wenham in 300.

Troll Slayer, Giant Slayer Unit, Marauder MM16 Slayers

I decided on a group shot of all my currently-finished Slayers, to see how they looked together. Also including the rebased-on-32mm Stonehaven Dwarf Berserker, who I think looks much better on the larger base.

Then while putting them all back onto the shelf with the new three, I noticed that I actually had enough for a complete KoW regiment, plus the two heroes on their 32mm bases. So, having accidentally achieved Numberwang, I took them down again and mounted them on a unit base and took a couple more photographs. They’re guaranteed to be juggled around as I complete more of the metals. The later Giant Slayers will be condensed into their own regiment along with standards and musicians, while the smaller models – Troll Slayers as well as the Marauder and older Citadel models will end up on their own regiment base. But for now, they’re ready to kick some arse as a single unit!

Troll Slayer, Giant Slayer Unit, Marauder MM16 Slayers

Troll Slayer, Giant Slayer Unit, Marauder MM16 Slayers

Troll Slayer, Giant Slayer Unit, Marauder MM16 Slayers

Sedition Wars Terrain Set Crates

Sedition Wars Terrain Set Crates

Recently I completed and showed off the barricades from the Sedition Wars Kickstarter’s Terrain Set. Today I have some more scatter terrain to share – specifically the crates.

Not my work. Clicky the pic to go to Agis' site for lots more Imperial Assault goodness.

Not my work, but the work that inspired these getting painted after all this time. Clicky the pic to go to Agis’ site for lots more Imperial Assault goodness.

Once again, I’ll show the pic and link to the post that inspired me to dig them out and get them done – from Agis Neugebauer’s blog. I liked the weathering that he put into the crates, and also liked the contrast created via the red straps. He did use transfers to define them with Imperial cogs, and once again I decided to skip any markings that would tie them to any one universe, so they can be used in anything from “movie-style” Bolt Action WWII (when we don’t go to great pains to ensure historical accuracy of the design of all the crates left around that are being used as cover, through moderns, Star Wars (we can see how well they work above), near-future, post-apocalyptic right through to the 41st Millennium, where mundane things still often look strangely familiar…

Sedition Wars Terrain Set Crates, Metal Cadian Imperial Guard, Minotaurs Space Marines

The proud warriors of the Minotaurs Chapter provide scale reference alongside members of the Terror Australis Regiment of the A̶s̶t̶r̶a̶ ̶M̶i̶l̶i̶t̶a̶r̶u̶m̶ Imperial Guard

As can be seen, I gave them a light weathering, though not to the level of detail or care that Agis did on his. As far as scatter terrain goes, they’re really just more of the same sort of stuff I usually churn out at the level I’m happy to go with, generally. Not superbly exciting by any means, but additional, solid looking stuff that looks better than simply a spray and wash, a bit of extra weathering, though not nearly to the effort put in by people like D&B in his diorama-level pieces. Oh, I also found and finished one more of those U.S. DUST Tactics Supply Drop Crates, so it gets a guest appearance in this photo.

And finally, some “in action” type shots alongside some of the other appropriate scatter terrain I’ve finished in roughly the last year. DUST Tactics Supply Drop Boxes, DUST Tactics Dragon’s Teeth and Confrontation Walls, and the very recent Sedition Wars Terrain Set Barricades. There’s not a lot of height variation, nor any foliage, but just these bits of scatter make a passable battle site for a small combat patrol sized skirmish.

Sedition Wars Terrain Set Crates, Sedition Wars Terrain Set Barricades, Confrontation Walls, DUST Dragon’s Teeth, DUST Supply Drop Boxes, Metal Cadian Imperial Guard, Minotaurs Space Marines, Urbanmatz Badlands Mat

Sedition Wars Terrain Set Crates, Sedition Wars Terrain Set Barricades, Confrontation Walls, DUST Dragon’s Teeth, DUST Supply Drop Boxes, Metal Cadian Imperial Guard, Minotaurs Space Marines, Urbanmatz Badlands Mat

Sedition Wars Terrain Set Crates, Sedition Wars Terrain Set Barricades, Confrontation Walls, DUST Dragon’s Teeth, DUST Supply Drop Boxes, Metal Cadian Imperial Guard, Minotaurs Space Marines, Urbanmatz Badlands Mat

ORC1 Oldhammer Warrior Orc “Slyss” (1987?)

This time I have a very “Oldhammer” Warhammer Orc Warrior, known as “Slyss” from the 2nd-3rd Edition era, sculpted by Kev Adams. I bought this guy and started to paint him long, long ago and only recently found him in a Chessex case and made myself complete him.

ORC1 Oldhammer Warrior Orc "Slyss"

As can be seen, he’s one of those models with the huge, spiky shield boss. A big part of getting this guy finished was simply deciding what to do with it. The easier option would have been to make it a big, nasty spike. The other obvious option, though a little more involved was to follow Oldhammer tradition and turn it into a 3-D shield, and use the boss as the basis for a nose. Obviously, I went with the latter. I built up very slight brow ridges, bridge of the nose, cheekbones, lower lip, teeth and nostrils with liquid greenstuff. Mostly so the shield wouldn’t look like a completely flat piece with a big spike sticking out of it. The Bridge of the nose and nostrils then, were the most important aspects.

ORC1 Oldhammer Warrior Orc "Slyss"

The earliest reference I can find of this guy is in the 1987 Citadel Journal, which pretty safely dates the model to 1986-87. He’s an evil-looking bastard, alright – and a good example of the whole “older models have character” thing that people like to bandy around – and overuse at times. With such squinty eyes and a weird-as-hell mouth – he fits in here. He’d work okay these days as some sort of Chaos Mutant, painted in more human skin tones.

ORC1 Oldhammer Warrior Orc "Slyss"

Rear view shows the slightly crude, but still detailed sculpting of Kev Adams’ early Warhammer Orcs. Along with the crocodillian mouth and face that is oddly reminiscent of some renditions of trollface. Also, my awesome handpainted woodgrain shieldback. :p

ORC1 Oldhammer Warrior Orc "Slyss"

This pic is the money shot – my show-off pic for the freehanded Ogre-Face shield design. No radiating black sun lines or chequerboard on this one. Just the nasty face, scowling at the world in front.

Stop here. Sit and rest awhile – Mantic’s Mars Attacks Stop Signs and Benches.

A bit over a year ago I busted open my Mars Attacks Accessory sets, and got to (slowly) working on the contents (occasionally). So far, I’ve finished the incredibly unimpressive result of 8 box stacks, from the four sets I had. Recently, I’ve finished a few other bits and pieces. Namely, the STOP signs, and the benches.

Mantic Mars Attacks Accessory Scenery Stop Sign 28mm Wargaming

You can’t really tell here, but there’s a subtle metallic as part of the red and I tried out Warcolours Metallic White on the white sections. I did this to emulate the reflective qualities of real STOP signs, at least those located in Melbourne, where I live. I initially tried the metallic white over silver but it worked poorly, so I repainted the details in white, and then went over with the Metallic White. Even in-hand, the metallic effect needs to be pointed out with an “oh yeah, now I see it” result. A kinda generic grungy grey for the bases.

Mantic Mars Attacks Accessory Scenery Benches 28mm Wargaming

The benches. To me they seemed much more like public bus (or tram) stop-style benches than anything else. In keeping with this, I painted them in a horribly-plasticy bright orange, of the sort that would have been seen back in the 1980’s. Of course, back in the 80’s here the bus stop benches were made of concrete and wood, and painted a dark green. I dunno, I could have gone with a sleeker, more modern silver which would have been easier, but I felt that a harsh, bright colour (then dirtied a little) is a little more evocative of actual urban city streets. And the horrid orange just “feels” right for a bus stop. I used Warcolour’s Orange “One Coat”, though naturally, it took multiple coats to actually cover over the base silver spray. So much for “One” Coat…

Mars Attacks Accessory Pic from Iron Saint’s Children of the Kraken Blog – go visit!

I’m recycling this pic from the post about boxes again, to show the contents of the full sets, along with just how little I’ve actually gotten done so far. I have the rubbish bins and mailboxes sitting in a little container, sprayed silver. I wanted to salt-weather them, but haven’t gotten around to it yet, and at this rate it’ll be a long wait until next summer before I get off my arse and get them done. I want to do a similar thing with the picket fences. In my mind’s eye, they’re dirty white, with the paint peeling off (salt weathering) to reveal stained grey wood underneath.

Mantic Mars Attacks Accessory Scenery Stop Sign Benches 28mm Wargaming

Scale shot with thanks to a Minotaurs Space Marine and a T-800 Endoskeleton. I think these will be perfect for any modern/post apoc and even urban sci-fi battlefield that’s not too far removed from “Earth-like” environments. One day I might even paint up my Secret Weapon tiles from their Kickstarter. Seems like a Summer project…

Oh, and as an addendum. I found these yesterday. Ignore the game of Runebound in progress and note the ten(!) additional accessory packs that were inside a tub of Mars Attacks scenery when I was looking for an unassembled incomplete Imperial Bastion. That’s a hell of a lot of mould-line scraping before I can get to the easy-ish part of painting up all that scatter terrain…

Sedition Wars Terrain Set Barricades

Sedition Wars Terrain Set Barricades, Metal Cadian Shock Troops, Imperial Guard, Astra Militarum

Remember Sedition Wars and it’s incredibly-successful Kickstarter? Of course you don’t. That’s because you either never heard of it, or the complete abortion of a game and fulfilment means you’ve blocked it from your memory like a terrible life experience, which it very much was. I was one of the ones taken in by a love and respect of Mike McVey going back decades to my youth and being foolish enough to believe the h̶y̶p̶e̶ lies of the campaign put on by Studio McVey and CMON to the tune of quite a few hundred dollars for my multiple pledges. Anyway, this post isn’t to bitch about the pile of money I flushed down the toilet in a mess of warped boards, terrible unplaytested rules and nicely sculpted but terribly cast restic models.

It’s about the one bright spot of the entire project (aside from the textured bases, I guess). The Terrain Set. More specifically, for this post, the barricades. I’ve been buying a bit of stuff for FFG’s various Star Wars games in the past 6 months or so, and part of that has naturally involved looking at pictures of stuff.

Not my work. Clicky the pic to go to Agis' site for lots more Imperial Assault goodness.

Not my work, but the work that inspired these getting painted after all this time. Clicky the pic to go to Agis’ site for lots more Imperial Assault goodness.

While doing so, I came across some pics on Agis Neugebauer’s blog. Now, he’s a poster over on Dakka, and I’m somewhat familiar with his work posted there, but I hadn’t seen his Star Wars Imperial Assault stuff before. Lots of great stuff there, including an Oskara conversion that I will totally be ripping off, but Agis’ also has a bunch of the Sedition Wars stuff painted up, and looking pretty bloody sweet. This triggered the “Hey, I’ve got those somewhere!” reaction, and off I went to find the crates, and while doing so, also grabbed out the barricades.

Sedition Wars Terrain Set Barricades

The barricades got finished first. Sprayed a custom green based on Vallejo’s 890 Reflective Green, then oversprayed with Plastic Soldier Company’s German Field Grey (Don’t buy their spray cans – they leak!). I then added the Lambdas, taken from a Warlord Games decal sheet (I would have preferred some white outline tank numbers from the WLG German Turret sheet, but I didn’t have any, and Lambdas are totally a thing in modern military markings and so in my mind help these pieces fit anything from near-future to 40k. I then drybrushed the barricades with Army Painter’s Army Green, and then Vallejo Bonewhite on the extremes. Some foam-weathering with Vallejo Metal Black, Vallejo Plate Mail Metal coloured primer and Vallejo Scorched Brown. Followed up with a spray of Plastic Soldier Company’s Dirt Brown Weathering Spray (they leak, FFS!), wiped down with a damp cloth, and finally a quick go-over with some of the foam-weathering, and they were ready for a heavy spray of gloss polyurethane varnish for protection, and then the good old Testor’s Dullcote to make them look good.

Sedition Wars Terrain Set Barricades

I also wanted to avoid any overtly-distinguishing iconography that would tie them too closely to any particular universe. So this meant no Imperial Aquilas or Imperial Cogs, and the dirty weathered look fits pretty well with just about anything, except maybe an especially-shiny game of Infinity. I can’t see pre-fab barriers getting carefully cleaned before being loaded into a transport between deployments, after all.

Sedition Wars Terrain Set Barricades, Metal Cadian Shock Troops, Imperial Guard, Astra Militarum

I have 12 barricades in total and I think they came up very nicely, but I’m also quite aware that looking at the individual weathering patterns on each of them isn’t exactly enthralling blog content, so here are some more posed shots with a few of my Imperial Guardsmen from the Terror Australis Regiment providing scale. Also, a sneak preview of my next mat review…

Sedition Wars Terrain Set Barricades, Metal Cadian Shock Troops, Imperial Guard, Astra Militarum

Sedition Wars Terrain Set Barricades, Metal Cadian Shock Troops, Imperial Guard, Astra Militarum

Review: Urbanmatz’ 6’x4′ Snow Territory Game Mat.

Warning, Pic HEAVY! – Also, most pics can be clicked for larger versions.

Recently, at the end of 2016 I placed an order for three gaming mats from Urbanmatz, based in the Czech Republic. There was a delay on one of the mats I ordered, as it was out of stock for a few weeks, though Martin was kind enough to offer me a freebie Snow Territory mat, which he explained had some yellowed stain marks on it. I gladly accepted the offer, and am reviewing the mat now, with the noted discolouration noted and allowed for. I recently reviewed their 6’x3′ Space Mat along with the Fantasy Flight 3’x’3′ X-Wing Starfield Mat.

Urbanmatz' 6'x4' Snow Territory Game Mat.

 

Once again, the Urbanmatz mat is on neoprene (mouse pad material) and is quite nice. I wasn’t sure what to expect when it was offered, and while I was secretly hoping for a 6×4, was expecting a 4×4, not wanting to get my hopes up – but it turned out that it was a full-sized 6×4 mat.

——

Now I don’t have any models at all based for a snow environment, and even my thoughts around (eventually) playing Frostgrave involved basically ignoring the cold-weather setting but my initial thoughts when it was offered was actually to use it as a second mat for X-Wing, especially given the precedent from the recent films for atmospheric fighter battles.

Urbanmatz' 6'x4' Snow Territory Game Mat.

 

Now I don't have any models at all based for a snow environment, and even my thoughts around (eventually) playing Frostgrave involved basically ignoring the cold-weather setting but my initial thoughts when it was offered was actually to use it as a second mat for X-Wing, especially given the precedent from the recent films for atmospheric fighter battles.

 

 

Unlike some other Snow/Arctic mats I’ve browsed recently, the details in the Urbanmatz offering are quite subtle and non-specific, even being pretty scale-agnostic. Just offering a hint of something buried below the snow, but subtle enough that the mat could also be used as a cloudscape if that was something needed for a game. I’d take some comparison pictures showing the textures with 15mm armour followed by 28mm infantry if I had anything painted appropriately.

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars X-Wing

I did spend the better part of an afternoon with Marouda setting up and laying out figures to see how it all would look. First up were a couple of flights of X-Wing ships.

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars X-Wing

I honestly think it looks a treat for X-Wing and gives a nice unique look to the (pretend) battle – and should do so when we actually do play X-Wing on it.

Urbanmatz' 6'x4' Snow Territory Game Mat.

Here’s a close-up of some of the discolouration on the mat. I was expecting it to be far worse, potentially in large yellow piss-patches in the middle of the mat but the issues are limited to a few places around the edge. While I can fully understand why Urbanmatz are unable to sell these, they’re minor enough for me to be able to ignore, especially given that the mat was a freebie

Urbanmatz' 6'x4' Snow Territory Game Mat, Bolt Action

Time for some 28mm models, then. As mentioned before, I lack enough proper painted WW2 to really do much, and I’m completely lacking in snow-themed terrain, so I laid down some old, old Armorcast ruined building corners and my platoon of painted Warlord T-34/85 tanks. The tanks looked alright, though obviously whitewashed would have fit in more effectively.

Urbanmatz' 6'x4' Snow Territory Game Mat, Bolt Action

The buildings, left unbased as they are is usually a positive on darker surfaces as it allows for much more modularity, but on the Snowy Terrain mat they do kinda stand out too starkly. Clearly, if I want to do much with this mat, I should sort out some snow-covered hills and perhaps a few copses of snow-tipped trees. Frozen lake? Snow-covered cabin? Grimdork from Dakka did a whole little snow-themed table recently, and I do have a jar of Jo Sonja’s texture paste around here somewhere…

Urbanmatz' 6'x4' Snow Territory Game Mat, Bolt Action

The buildings could probably work reasonably well on the Snowy mat if I were to make some squares of “internal damaged building” to lay in the middle of them. Or maybe even some squares of appropriate-looking linoleoum cut with slightly uneven edges?

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

Next up was to lay some more dense scenery onto the mat and see how it looked. First up we went for a kind of Fantasy layout, a pretend-game of Sorta-Frostgrave, to see how it all looks. More specifically to see how my existing terrain worked with the Snow Territory Mat.

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

And… it actually looked decent. To me at least. The dark, scorched brown looking bases on both the models and some of the terrain obviously contrast quite starkly with the Snow Territory mat, but it kinda works for me. Obviously snow on bases would make everything tie in much more effectively, but it’s far from awful.

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

I hadn’t expected it to work this well, but I found it quite reasonable. Far from perfect, but very workable.

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

Urbanmatz' 6'x4' Snow Territory Game Mat. Frostgrave

Next up I added my Conan Wolves into the fray. Frostgrave has random encounters. Probably not 10 wolves at a time, but whatevs. This is for photos.

So yeah. Not too bad at all. Next up was to swap some of the fantasy terrain out and do the same with some 40k models and terrain.

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Urbanmatz' 6'x4' Snow Territory Game Mat. Warhammer 40,000, 40k, Kill Team

Yeah, that’s a lot of 40k photos. Basically, I took a ton photos and used a small proportion of them above. I guess the point of them all is to give a good “feel” of how the mat works in a smallish 40k game with a pile of scatter terrain on it. I wasn’t hopeful when it came to using it for 40k, but as with the “Frostgrave” game above, I’m pleasantly surprised with how well it works.

Urbanmatz' 6'x4' Snow Territory Game Mat. Wolf Pack

Urbanmatz' 6'x4' Snow Territory Game Mat. Wolf Pack

I thought I’d see how the wolves I painted recently look on the mat without vikings and scenery in the way as well, especially given their snow-grey coats. The answer, pretty decent.

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars Miniatures

Star Wars Imperial transports in roughly 6mm scale? Seems to work well…

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars Miniatures

As does their larger cousin in (sorta) 28mm scale from the Hasbro/WotC Star Wars Miniatures game.

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars Miniatures

Leading to potential use next time we go to a snow planet in the Star Wars Edge of the Empire RPG (The PC’s minis are on the far right).

Urbanmatz' 6'x4' Snow Territory Game Mat. Star Wars Miniatures

I evidently only have 6 Snowtroopers. How embarassing! I also couldn’t find my AT-STs.

Urbanmatz' 6'x4' Snow Territory Game Mat. Axis & Allies Angels 20, WWII Dogfight, WW2 Dog Fight

Bringing us full circle with some air combat, I got out some Axis & Allies Angels 20 planes to see how it looked.

Urbanmatz' 6'x4' Snow Territory Game Mat. Axis & Allies Angels 20, WWII Dogfight, WW2 Dog Fight

Once again, I feel that it looks fine – Great even for air combat battles. I got out some Soviet and Luftwaffe planes for these pics, but it would work just as well for Western Europe 1945 or any other era’s dogfights above the snow. I had a feeling that it’d look good after seeing the X-Wing ships on it, but I wanted to put the WW2 fighters on it and see for myself.

Urbanmatz' 6'x4' Snow Territory Game Mat.

Urbanmatz' 6'x4' Snow Territory Game Mat.

Once again, the bag shots. The 6×4 bag comes with a carry bag that’s noticeably larger than the 6×3 (above in the shot).

Verdict: I’m very pleasantly surprised with the snow mat. I have to admit, it’s not something I’d have ever really considered purchasing, and getting it for free is the only reason I own it. Having it in hand and having had a significant play around with my models on it along with the camera, I can really appreciate it now – especially given the versatility that I managed to work out of it. It’s perhaps not the very best design out there if you only want to play Frostgrave, but I personally really appreciate the fact that it’s very scale-agnostic and works for games and scales from X-Wing to WW2 Dogfights to the more typical 40k/Frostgrave/etc. Clearly it’d work just as well for SAGA, WHFB, Kings of War, Bolt Action, Flames of War and pretty much anything in pretty much any scale needing a winter snow theme, given some complimentary scenery (which I lack).

And to reiterate – while I received this mat for free, there was no request for, no offer nor any implication of Quid Pro Quo in exchange for it. It was kindly offered (I’d guess because I’d already bought 3 and 2 of them were OOS) and gladly accepted, without knowing the size or condition it would be in, given that they were upfront that it was marked. All of the photos were taken over a couple of sessions as I worked out how best I could make use of it myself, and all of the review text are my honest thoughts, feelings and reflections on the mat.

Iron Warriors Army Building – Close Combat & Melta

Converted Iron Warriors Chaos Space Marines

This past week I finally finished off another three Iron Warriors. Both rebasing them on the new Sector Imperialis 32mm bases from their old 25mm ones and actually completing their paint – started well over a decade ago. Yes, I paint slow, but they’ve also spent a goodly time put away in boxes before I decided to revive the project last year.

Converted Iron Warriors Chaos Space Marines

Two of these models feature arm replacements. The “champion” has a Necromunda Pit Slave chainsaw arm, along with a 90’s-era metal Iron Warriors Shoulderpad. The central warrior has a Melta Gun arm that’s taken from a manufacturer of not-40k miniatures, again from the 1990s. It came from one of their Not-Orks, later renamed “Org” and changed to a not-at-all-Ork-based organised crime kind of faction after GW sent them one of their nasty lawyer letters. Because GW owns the concept of Orcs in space. Apparently. They had a game which from memory actually had decent rules. If I ever remember their name, I’ll edit it in. Anyway, the Melta Gun arm looked great, and it found its way onto one of my Iron Warriors, a squad with a large number of obvious cybernetic implants and limb replacements. Once again, I’ve added “IV” decals to the models, to represent their still-present pride in being members of the IV Legion.

Converted Iron Warriors Chaos Space Marines

Again, aside from mechanical parts from Necromunda models and the Org arm, the models are built with a mixture of parts from modern loyalist marines, modern chaos marines, metal 2nd & 3rd edition-era chaos shoulder pads, Iron Warriors metal parts and Iron Hands metal parts. The central model’s head and torso come from the ’90s metal chaos marine biker conversion parts.

Converted Iron Warriors Chaos Space Marines

The third Iron Warrior comes with a not-so-subtle message for any who he may encounter. The chainsword’s hazard stripes look terrible when blown up to this size, but at their actual size they look completely fine.

Converted Iron Warriors Chaos Space Marines

I’ve got another five of this squad on my paint desk at present to complete, along with another four including a Warsmith in the cabinet waiting to be moved out. Following that I have an old Forge World Castraferrum Dreadnought and Vindicator to find and fix up – both purchased many years ago before the FW kit was replaced with the Citadel kit. Then I can move onto newer purchases, newer models and newer plans for my Iron Warriors.

Iron Within! Iron Without!