Brigade Models – Celtos: Fir Bolg Skeletons with Sickles – for Kings of War

Celtos Fir Bolg Skeleton with Sickles

A dozen Celtos Fir Bolg Skeleton with Sickles

I’ve painted up a couple of units of “Fir Bolg” Skeletons from Brigade Models now, and this makes the third. Or the fourth, depending on whether I count those spearmen as one or two units, as they can make for either a Horde or two Regiments. I know I’ve got another 16 archers (two troops of 8) to paint as well, so once I clean up my desk in the next week, I’ll spend some time cleaning the archers up and then hit them with the spray can. This time, we’ve got Skeletons with Sickles.

Staying with the same colour scheme I’ve used on their predecessors and in keeping with the rest of the army – Red and Black, Iron and Brass, Rust and Verdigris, Cadmium-Red wood – and Bone. The tabards and cloth this time have been given a Par Chevron in red and black.

Celtos Fir Bolg Skeleton with Sickles

Standard Bearer, Skeleton Leader with Axe (Sickle) & two champions

Celtos Fir Bolg Skeleton with Sickles

The standard came from one of the other Fir Bolg skeleton sets, and working out how I’d create the banner took a bit of time. Eventually I settled on a cloth banner, cut from the material taken from an old pair of shorts and fixed with PVA. The Hero is actually their Skeleton Leader with Axe model, with the axe cut and trimmed into a sickle of sorts. I painted the second of the two champions with the same Par Chevron, though reversed. I’d like to move him to a different unit down the line, and perhaps replace with a drummer, but another £3.50 for a drummer feels a little steep when the champion – a mod of the same base figure plus two troopers runs £4.00 by comparison. I dunno. I’ll figure it out later. I’d originally planned on giving the two champions different shields as well, but when it came time to complete the command figures, I realised that the shield I’d initially selected would not have looked good angled at 90 degrees, and by then I had already ended up using the last “horned skull” shield on one of the troopers, and didn’t feel like tearing the superglue-and-greenstuff mod apart.

Celtos Fir Bolg Skeleton with Sickles

Sculpt #1 of #2

Celtos Fir Bolg Skeleton with Sickles

Shield view of Sculpt #1

Celtos Fir Bolg Skeleton with Sickles

Sculpt #2 of #2

Celtos Fir Bolg Skeleton with Sickles

Shield view of Sculpt #2

Only two sculpts, unfortunately. I like having one-piece metal sculpts for these models, but I do wish there was a little more variety in the number of sculpts, like there typically was in the Old(Hammer) days. The shields also reveal that rather than having given the models that lack sculpted shields freehand shields, I used some of the old-school, 20-year-old Warhammer Undead shield decals that I found recently. Once again, these guys were painted using the “Warm Bone” method, starting with a cheap cream spray can from the local hardware store – with much of the work done bit by bit during lunch breaks at work. The final work was completed last Monday, so these guys also qualify as my September Undead entry for the Tale of Painters challenge over on Dakka.

Celtos Fir Bolg Skeletons with Sickles

Celtos Fir Bolg Skeletons with Sickles

Celtos Fir Bolg Skeletons with Sickles

As per usual, the final shots show them off blu-taced down to a regiment base for KoW – which I really need to get around to playing again sometime soon. I’ve not done much tabletop gaming in the last couple of months, as it gets a bit too chilly out in the War Room, and as a result my regular gaming sessions with the group for the past few months have been digital (The Division, Destiny, Dead Island) rather than tabletop-oriented. Hopefully the weather can actually change a little now that Spring is here, and we can get some wargaming and tabletop gaming done again!

Brigade Models – Celtos: Fir Bolg Skeletons with WarScythes – for Kings of War

Celtos Fir Bolg Skeletons with Warscythes

A couple of months ago I ordered a bunch of “Fir Bolg” Skeletons from Brigade Models, originally produced and still sold for the “Celtos” skirmish miniatures wargame. Roughly two weeks later, which translates to two months ago now, they arrived and I reviewed them. As I’ve said in the past, I’ve got a real soft spot for one-piece metal skeletons. There are some other lovely models out there, but many of them are very fragile – and I prefer more sturdy models for wargaming.

Now, I’ve finished painting the first unit of them – or the first 12 out of the 59 models I purchased, at least.

Celtos Fir Bolg Skeletons with Warscythes

The colour scheme is pretty simple and in keeping with the rest of the army – Red and Black, Iron and Brass, Rust and Verdigris, Cadmium-Red wood – and Bone. The tabards and cloth have simply been quartered with the cloth colours to keep it simple. One each of the three sculpts for your perusal. I purchased four of each in order to set up 12 on a 100mm x 80mm base which will represent a Regiment in Kings of War.

Celtos Fir Bolg Skeletons with Warscythes

A Horde of War Scythe-Wielding Skeletons – Ready for some Reaping!

The group shot showing all of the 12 I bought. Since we’re just talking about duplicate models, I thought it more interesting to skip showcasing each individual duplicated sculpt. With a recent game of KoW against Marouda’s Undead showing how effective Horde-sized units are, I’m tempted to buy another set of these guys for her – and some of the other Regiment-sized groups as well!

Brigade Games’ Skeletons based as a Regiment of Skeletons with 2-handed weapons for Kings of War.

Based like this, the models work very nicely as a KoW regiment – Tournament-approved as well as I’ve checked with a key member of the Rules Committee. Beyond that they’re very easily popped off the regiment base for use in Role-playing or any other tabletop or board game. Maybe even Celtos!

Celtos Fir Bolg Skeletons with Warscythes

Celtos Fir Bolg Skeletons with Warscythes

More poses would be ideal, but these will still work nicely enough on the table. Overall, I think these are great models – very much fit for purpose, and I’m very happy with them.